Wechat number：
-
Influence of curing conditions of glass fiber cloth on bonding performance:
2023-02-20Generally speaking, after the construction of cement-based materials, certain measures shall be taken for curing.
-
Deep Report of Sichuan Glass Fiber Industry: Thermoplastic Yarn for Automobile Lightweight
2023-02-171、 Glass fiber is the mainstream reinforcing material, and technology drives the upgrading of product structure
-
The use effect of glass fiber cloth is affected by the change of indoor air temperature
2023-02-16Human body temperature is basically stable, with a small range of change, and does not change with the rise and fall of the external temperature.
-
Precautions for glass fiber cloth construction
2023-02-15When lapping the grid cloth, the general requirement is not less than 50mm. In the thermal insulation construction, the special parts prone to cracks are also strengthened.
-
Reasons for serious water loss of glass cloth plastering surface
2023-02-14Reasons for serious water loss of glass cloth plastering surface: According to the results of the sampling inspection report of the National Construction Engineering Quality Supervision and Inspection Center on the cement polystyrene board of the project, the water absorption rate exceeds the product technical index (<30%) by 49.20%,
-
Treatment of insulating base of glass fiber cloth wall
2023-02-13Treatment of glass fiber cloth wall insulation base: Thoroughly remove the floating ash, oil and other substances affecting the wall construction on the surface of the base course wall.
-
Acoustical properties and application of glass fiber cloth ZL rubber powder polyphenyl particle ther
2023-02-12Acoustic performance and application of glass fiber cloth ZL rubber powder polyphenyl particle thermal insulation material:
-
Fire resistance of glass fiber cloth
2023-02-11The system itself has an air layer that is connected as a whole. In case of fire, a pilot air duct will be formed quickly to spread the fire rapidly. The external thermal insulation system of polystyrene board exterior wall will shrink and melt quickly under high temperature radiation
-
Requirements for glass fiber cloth wall insulation and facing brick
2023-02-10Requirements for glass fiber cloth wall insulation and facing brick: When the anti-crack mortar reaches the initial setting strength, it should be properly sprayed for curing. After about 7 days, it can be divided and snapped according to the requirements of the drawing.
-
Hollow phenomenon of insulation board when pasting glass fiber cloth insulation layer
2023-02-091. The flatness of the base wall cannot meet the requirements.
Hello! Welcome to the website of Sichuan Yuda Special Glass Fiber Co., Ltd!
135-6822-2642
Wechat
Contact
Telephone